安徽省节能监察办法
安徽省人民政府
安徽省人民政府令第221号
《安徽省节能监察办法》已经2009年3月19日省人民政府第31次常务会议通过，现予公布，自2009年10月1日起施行。
省 长
二○○九年四月七日
安徽省节能监察办法
第一条 为规范节能监察行为，提高能源资源利用效率，根据有关法律法规，结合本省实际，制定本办法。
第二条 本办法适用于本省行政区域内的节能监察活动。
第三条 本办法所称节能监察，是指节能行政主管部门对从事能源生产、经营、使用等相关活动的单位以及个人（以下称被监察对象）执行节能法律、法规、规章和标准的情况进行监督检查，并对违法行为依法予以处理的行为。
第四条 节能监察应当坚持公开、公平、公正以及教育与处罚相结合的原则。
第五条 县级以上地方人民政府应当加强对节能监察工作的领导，部署、协调、推动节能监察工作。
第六条 县级以上地方人民政府节能行政主管部门负责本行政区域内的节能监察工作。县级以上地方人民政府建设、交通、机关事务管理等有关部门在各自的职责范围内开展节能监察工作，并接受同级节能行政主管部门的指导。
第七条 省及有条件的市、县设立节能监察机构。节能监察机构受有关行政主管部门的委托，具体负责节能监察工作，其主要职责包括：
（一）监督检查被监察对象执行有关节能法律、法规、规章和标准的情况；
（二）开展节能法律、法规、规章和标准的宣传和培训；
（三）受理违反节能法律、法规、规章和标准的行为的举报和投诉；
（四）依法查处和纠正违反节能法律、法规、规章和标准的用能行为。
第八条 节能行政主管部门和节能监察机构应当配备必要的节能监察人员和装备，保证节能监察工作的开展。
节能监察人员应当具备相关的专业知识和业务能力，按照有关规定取得行政执法资格。
第九条 节能监察机构应当加强节能监察工作信息化建设，利用信息技术和手段对被监察对象实施节能监察。
第十条 节能行政主管部门和节能监察机构设立并公布举报、投诉电话或者电子邮箱、网址等联系方式，鼓励单位和个人举报违反节能法律、法规、规章和标准的行为；受理举报的，应当为举报人保密。
为查处重大违法用能行为提供重要线索和证据，经查属实的，节能行政主管部门对举报人应当给予奖励。
第十一条 下列事项应当实施节能监察：
（一）耗能高的产品单位产品能耗限额标准执行情况；
（二）节能目标责任制、节能管理制度和相关措施建立及落实情况；
（三）能源计量、能源消费统计制度落实情况；
（四）固定资产投资项目节能评估审查制度执行情况及在设计和建设过程中节能措施落实情况；
（五）禁止生产、进口、销售国家明令淘汰或者不符合强制性能源效率标准的用能产品、设备规定执行情况；
（六）公共设施和大型建筑物装饰性景观照明能耗情况；
（七）办公、经营场所实行温度控制制度执行情况；
（八）节能法律、法规、规章等规定的其他应当实施节能监察的事项。
第十二条 建筑节能、交通运输节能和公共机构节能的监察工作，相关部门可以委托节能监察机构开展。
第十三条 节能监察分为现场监察和书面监察。
实施现场监察，应当提前将实施监察的依据、内容、时间和要求，以书面形式通知被监察对象。办理案件和受理举报、投诉以及应当以抽查方式实施的节能监察除外。
采用书面监察，应当书面通知被监察对象。被监察对象应当按照监察通知要求报送书面材料。
第十四条 现场监察应当有两名以上节能监察人员进行。节能监察人员应当出示有效行政执法证件，制作现场监察笔录，并由节能监察人员和被监察对象负责人或者其委托人签字或盖章。被监察对象负责人或者其委托人拒绝签字或盖章的，节能监察人员应当在监察笔录中注明。
第十五条 节能监察人员现场监察时，可以进入被监察对象的工作场所进行现场检查，查阅或者复制与监察事项有关的文件、资料、财务账目及其他有关的材料；要求被监察对象在规定期限内，就询问的有关问题作出书面答复。
第十六条 被监察对象应当如实说明情况，提供相关资料，不得阻碍节能监察，不得隐瞒事实真相，不得伪造、隐匿、销毁、篡改有关材料。
第十七条 节能行政主管部门和节能监察机构应当在节能监察结束后15日内，形成节能监察报告，并告知被监察对象。节能监察报告包括实施节能监察的对象、时间、地点、内容、方式，以及对违法行为的处理意见等。
第十八条 经节能监察，发现被监察对象违反节能法律、法规、规章和标准的，由节能行政主管部门下达整改通知书，责令限期改正；发现被监察对象未违反节能法律、法规、规章和标准，但存在不合理用能的，由节能行政主管部门或者节能监察机构下达节能监察意见书，要求被监察对象采取措施改进。
第十九条 被监察对象对整改通知书或者节能监察意见书有异议的，可以自收到整改通知书或者节能监察意见书之日起20日内，向节能行政主管部门申请复查。节能行政主管部门应当自收到复查申请之日起20日内完成复查工作，并以书面形式将复查结论告知被监察对象。
第二十条 节能监察人员与被监察对象有利害关系或者其他关系，可能影响监察公正性的，应当回避。被监察对象认为节能监察人员应当回避的，可以书面或者口头方式向节能行政主管部门或者节能监察机构提出。
第二十一条 被监察对象对整改通知书有异议，要求听证的，节能行政主管部门应当举行听证。
第二十二条 节能监察经费列入同级财政预算。节能监察机构实施节能监察不得向被监察对象收取费用。
第二十三条 节能行政主管部门和节能监察机构不得泄露被监察对象的技术秘密和商业秘密，不得利用工作之便谋取不正当利益，不得进行影响公正执法的行为。
第二十四条 违反本办法规定，被监察对象未如实提供相关资料的，由节能行政主管部门给予警告，责令限期改正。
第二十五条 被监察对象收到整改通知书无异议或者经复查后，异议不成立的，应当在规定的期限内进行整改；无正当理由不按要求整改或者经整改仍达不到要求的，由节能行政主管部门按下列规定提出意见，报请本级人民政府按照规定的权限处理：
（一）对新建国家禁止的高耗能工业项目的，责令停建、停止投入生产或者停止使用；
（二）对超过单位产品能耗限额标准用能的，责令停业整顿或者关闭。
第二十六条 节能行政主管部门、节能监察机构及节能监察人员有下列行为之一的，对直接负责的主管人员和其他直接责任人员依法给予行政处分：
（一）向被监察对象收取费用的；
（二）泄露被监察对象的技术秘密和商业秘密的；
（三）利用工作之便谋取不正当利益的；
（四）有其他违法行为的。
第二十七条 在节能监察过程中，发现被监察对象违反节能法律、法规、规章规定的行为，由有关部门依法处理。
第二十八条 本办法自2009年10月1日起施行
中外合作设计工程项目暂行规定(附英文)
国家计委
中外合作设计工程项目暂行规定(附英文)
（一九八六年三月二十七日国务院批准）
第一条 为了加强对中国设计机构同外国设计机构合作设计工程项目（以下简称合作设计）的管理，促进合作设计活动的开展，特制定本规定。
第二条 中国投资或中外合资、外国贷款工程项目的设计，需要委托外国设计机构承担时，应有中国设计机构参加，进行合作设计。中国投资的工程项目，中国设计机构能够设计的，不得委托外国设计机构承担设计，但可以引进与工程项目有关的部分设计技术或向外国设计机构进行技术经济咨询。外国在中国境内投资的工程项目，原则上也应由中国设计机构承担设计；如果投资方要求由外国设计机构承担设计，应有中国设计机构参加，进行合作设计。
第三条 需要进行合作设计的工程项目（包括合作设计所需的外汇），按照项目管理权限，由主管部门或建设单位在上报项目建议书或设计任务书的同时，提出申请，经批准后方可对外开展工作。小型项目，按隶属关系由主管部门或省、自治区、直辖市计划委员会批准。大中型项目，按隶属关系由主管部门或省、自治区、直辖市提出审查意见，报国家计划委员会审批；其中特大型项目，由国家计划委员会组织初审，提出审核意见，报国务院批准。项目的主管部门或建设单位在择优选定外国设计机构的同时，应选定中国的合作设计机构。
第四条 外国设计机构经设计资格审查合格者，方可承担中国工程项目的设计任务。外国设计机构的资格是否合格，由项目的主管部门进行审查。审查设计资格是否合格的主要内容：（一）外国设计机构所在国或地区出具的设计资格注册证书；（二）技术水平、技术力量和技术装备状况；（三）承担工程设计的资历和经营管理状况；（四）社会信誉。
第五条 合作设计双方必须签订合作设计合同，明确双方的权利和义务。合作设计合同应包括以下内容：（一）合作设计双方的名称、国籍、主营业所和法定代表人的姓名、职务、国籍、住所；（二）合作的目的、范围和期限；（三）合作的形式，对设计内容、深度、质量和工作进度的要求；（四）合作设计双方对设计收费的货币构成、分配方法和分配比例；（五）合作设计双方工作联系的方法；（六）违反合同的责任；（七）对合同发生争议时的解决方法；（八）合同生效的条件；（九）合同签订的日期、地点。
第六条 在签订合作设计合同时，被选定为合作设计的主设计方应与项目委托方签订设计承包合同。
第七条 合作设计可以包括从工程项目的勘察到工程设计的全过程，也可选择其中某一阶段进行合作。
第八条 合作设计项目的设备选型和材料选用，经合作设计双方协商后由主设计方提出，在确保生产工艺技术或使用要求的条件下，应优先选用中国的设备和材料。
第九条 合作设计应采用先进的、适用的标准规范，合作设计双方应互相提供拟采用的范本。
第十条 合作设计双方要进行设计条件会审，并对设计质量负责。合作设计双方按合同完成设计后，送项目委托方审查认可。
第十一条 在合作设计中，外国设计机构需要的地形、地质、水文、气象、环境调查等基础资料，由项目委托方按类别向各主管部门办理审批手续，实行有偿提供。使用资料者不得向第三方转让。
第十二条 在合作设计的过程中，合作设计双方应按合同要求严格履行自己的义务，如未达到合同要求，应按合同规定承担责任。
第十三条 合作设计双方设计所得收入，应按中国有关税法规定纳税。
第十四条 香港、澳门设计机构与境内设计机构进行合作设计，参照本规定执行。
第十五条 本规定由国家计划委员会负责解释。
第十六条 本规定自一九八六年七月一日起施行。
INTERIM PROVISIONS CONCERNING CHINESE-FOREIGN COOPERATION IN THEDESIGNING OF ENGINEERING PROJECTS
Important Notice: (注意事项)
英文本源自中华人民共和国务院法制局编译, 中国法制出版社出版的《中华人民
共和国涉外法规汇编》(1991年7月版).
当发生歧意时, 应以法律法规颁布单位发布的中文原文为准.
This English document is coming from "LAWS AND REGULATIONS OF THE
PEOPLE'S REPUBLIC OF CHINA GOVERNING FOREIGN-RELATED MATTERS" (1991.7)
which is compiled by the Brueau of Legislative Affairs of the State
Council of the People's Republic of China, and is published by the China
Legal System Publishing House.
In case of discrepancy, the original version in Chinese shall prevail.
Whole Document (法规全文)
INTERIM PROVISIONS CONCERNING CHINESE-FOREIGN COOPERATION IN THE
DESIGNING OF ENGINEERING PROJECTS
(Approved by the State Council on March 27, 1986 and promulgated
by the State Planning Commission and the Ministry of Foreign Economic
Relations and Trade on June 5, 1986)
Article 1
These Provisions are formulated to strengthen the administration of the
cooperation between Chinese designing institutions and foreign designing
institutions in the designing of engineering projects (hereinafter
referred to as "cooperative designing") and to promote the development of
cooperative designing activities.
Article 2
As regards engineering projects to be financed by Chinese investment or
Chinese-foreign joint investment, or by foreign loans, when their
designing is to be entrusted to foreign designing institutions,
cooperative designing shall be carried out with the participation of
Chinese designing institutions.
As regards engineering projects to be financed by Chinese investment, if
the designing can be undertaken by Chinese designing institutions, the
task shall not be entrusted to any foreign designing institution, but part
of the designing technology pertinent to the engineering project may be
introduced or foreign designing institutions may be approached for
consultancy on technological and economic matters.
As regards engineering projects to be constructed within the territory of
China and financed by foreign investment, the designing shall, in
principle, be also undertaken by Chinese designing institutions; if the
investors request that the designing be done by foreign designing
institutions, cooperative designing shall be carried out with the
participation of Chinese designing institutions.
Article 3
In cases where engineering projects call for cooperative designing
(including the foreign exchange needed for the cooperative designing), the
competent authorities or the units undertaking the construction project
shall, in accordance with the limits of authority for the administration
of construction projects, make an application while submitting a written
engineering project proposal or a written designing task report for
examination and approval; and only after obtaining approval can they begin
to peck for foreign cooperation. For small-scale engineering projects, the
matter shall be approved by the competent authorities or by the planning
commissions of the provinces, autonomous regions, or municipalities
directly under the Central Government in accordance with the respective
subordinative relationships. For large and medium-sized engineering
projects, the matter shall, in accordance with the respective
subordinative relationships, be examined by the competent authorities or
by the provinces, autonomous regions, or municipalities directly under the
Central Government, which shall then submit a report with their opinions
to the State Planning Commission for examination and approval. As to
extra-large engineering projects, the State Planning Commission shall
organize preliminary examination and submit a report with its opinions
concerning the examination to the State Council for approval.
The competent authorities or the units undertaking the construction
projects, while selecting the most qualified foreign designing
institutions, shall also select domestic designing institutions for the
cooperative designing.
Article 4
Only after passing an examination of designing qualifications can a
foreign designing institution be entrusted with the task of designing an
engineering project in China. The competent authorities for the
engineering project shall be responsible for examining the qualifications
of the foreign designing institution.
The examination of designing qualifications covers the following main
items:
(1) a certificate of registered designing qualifications issued by the
country or region where the foreign designing institution is located;
(2) the technical level, technical force, and the state of its
technological equipment;
(3) the record of its experiences in undertaking project designing and the
state of its operations and management;
(4) its reputation in society.
Article 5
A contract for cooperative designing shall be concluded between the two
parties in cooperation, stipulating explicitly the rights and obligations
of the two parties. The contract of cooperative designing shall include
the following main items:
(1) the names of the two institutions in cooperation, their nationality,
their head offices, and the names, positions, nationality and addresses of
their respective legal representatives;
(2) the purpose, scope and period of cooperation;
(3) the form of cooperation, and the requirements for the contents, depth
and quality of designs, and for work progress;
(4) the mix of currencies in which the two cooperating parties wish to be
paid for their designing fees, and the methods and the proportions of
distribution;
(5) the ways of business communication between the two parties in
cooperation;
(6) liabilities for the breach of contract;
(7) the ways of settling disputes over the contract;
(8) the conditions for the contract to be effective;
(9) the date and place for signing the contract.
Article 6
At the time when the contract for cooperative designing is signed, the
chief designing party selected shall sign a contract for project designing
with the entrusting party of the engineering project.
Article 7
The cooperative designing may either cover the whole process of an
engineering project, i.e., from prospecting to the designing of the
project, or just involve a particular phase of the project.
Article 8
With respect to the selection of the main types of equipment as well as
that of materials, the proposal in the matter shall, after consultation
between the two parties in cooperation, be put forward by the chief
designing party. Equipment and materials originating in China shall be
given priority in selection, on condition that they satisfy the
requirements of production in terms of technology and use.
Article 9
Advanced and appropriate standards and norms shall be adopted in
cooperative designing and the two parties in cooperation shall provide
each other with the models they plan to adopt.
Article 10
The two parties in cooperation shall have a joint check up on the
designing conditions, and both parties shall be jointly responsible for
the quality of the designs. As soon as the two parties have completed
their designing in accordance with the stipulations of the contract, they
shall submit the designs to the entrusting party for examination and
approval.
Article 11
In the course of cooperative designing, in case the foreign designing
institution requires basic data concerning the topography, geology,
hydrology, meteorology, and environment in the location of the project,
the entrusting party of the engineering project shall apply to the related
competent authorities for examination and approval in accordance with the
different categories of data, and the provision of such data is non-
gratuitous. The users of such data are not permitted to transfer the data
to a third party.
Article 12
In the course of cooperative designing, the two parties in cooperation
shall, in accordance with the stipulations of the contract, fulfil their
respective obligations to the letter; if one party fails to meet the
requirements of the contract, it shall take the liabilities stipulated in
the contract.
Article 13
The two parties in cooperation shall, in accordance with the provisions of
the tax law of China, pay taxes on the income accruing to them from the
designing work.
Article 14
Cooperative designing, undertaken by designing institutions in Hong Kong
and Macao with the designing institutions in the mainland, shall be
handled with reference to these Provisions.
Article 15
The right to interpret these Provisions resides in the State Planning
Commission.
Article 16
These Provisions shall go into effect as of July 1, 1986.
